Checking Your Oil Level
Checking your oils level is simple and easy and will show you if your engine needs oil. If the oil is too high or too low, it can cause car engine problems.
To check the oil, park on level ground and wait until the engine has cooled down after driving, then locate the dipstick. Pull it out and wipe it clean, then push it all the way back in until the top of it is seated properly in the dip tube again. Wait a moment then pull it out again. Check the level of the oil. If it’s between the high and low marks, you’re fine. The high and low marks can be denoted by two dots, an “H” and “L” or a shaded area on the dipstick. The photos provided below show a Honda dipstick which has the two dots.
 Engine Oil Dipstick |
 Cleaning the Dipstick |
 Dipstick Oil Level |
Why not just read the level first time around?
The first time you pull the dipstick out, it will have oil all over it and it will be difficult to tell where the level is. That’s why you need to wipe it on a rag to get a clean dipstick, then dip it back into the oil to get a good reading.
About the Author
ACE Mobile Mechanics
Car Service | Roadside Assistance | Vehicle Inspection
CALL 13 20 42
www.acemobile.com.au